Rhino-shelter HOUSE-14W X 42L X 15H Manuel d'utilisateur télécharger pdf (Page 1)

Assembly Instructions RV Style 14 x 42 x 15

V 2.2

Please Do NOT Return Assembly To Dealer or Store. For All Questions and assistance, contact MDM Products directly.

Customer Service 203-877-7070 or 800-447-7079

ASSEMBLY INSTRUCTIONS RV

HOUSE STYLE 14x42x15

Congratulations!

Congratulations on your purchase of a RV House

Style Portable Building by MDM Products, LLC.

With proper installation, use and maintenance,

your new unit will provide many years of good and

suitable service. Your new portable building is a

combination of excellent engineering and well

thought out design. The unit is comprised of a rigid

tubular frame, covered with a long life polyethylene

cover and double door ends.

The multiple part frame assembly is pre-drilled for

easy installation. The tubing is made from high-

grade galvanized steel to resist moisture and

oxidation over the life of the shelter. The main

cover and doors are made from ASTM-5 approved

polyethylene materials. The cover is UV protected

for continuous exposure to sunlight.

SAFETY WARNING

The installation of this unit must conform to the

requirements of all authorities having

jurisdiction in your specific local area. In the

absence of such requirements, the assembly

and installation must conform to the provided

assembly and installation instructions. MDM

Products, LLC will not be responsible for failure

to comply with any requirements in a given local

area. Damages, consequential damages, or

injuries caused by improper installation,

alteration, improper use, or damages caused by

snow, wind, or any acts of nature are strictly that

of the user. Unit is not intended for occupancy

for any length of time. NO running of internal

combustion engines, open flames or contact

with heated surfaces is allowed.

For installation assistance or Customer Service,

please call 800-447-7079 or 203-877-7070, 8AM-

5PM EST. Cartons should be inspected upon

delivery from carrier, and any evident damages

should be noted on the bill of lading before signing.

If upon opening the cartons hidden damage is

discovered, contact carrier or it’s agent

immediately. Claims for shipping damage MUST

be made with the shipping company by you as he

consignee. In the event of damage, an inspection

of the goods will be required. Do not discard

packing or any components before the freight

company inspection. All claims for freight damage

must be made within 15 days of receipt of the goods

in accordance with ICC regulations.

ASSEMBLY PROCEDURE

The proper sequence and steps to install this unit

will produce a proper and good installation. Failure

to read and follow these guidelines may result in an

improper installation and will void all warranty and

protection the owner is entitled to with the product.

The steps to be undertaken are:

1. Perform an inventory check before

beginning, to be certain all components are

available for installation.

2. Prepare location and place all unit

boxes near site unit will be located.

3. Assemble Eleven (11) arches of unit.

4. Assemble end arch, first interior arch, and

wind braces with the first top, base and side

rail sections.

5. Add additional arch assemblies with each

section of base rails and side rails.

6. Level and square unit.

7. Anchor frame assembly to ground with

provided anchors, U-bolts and drive rod.

8. Install Doors (2) on ends of frame assembly.

9. Install Main Cover over frame assembly.

10. Install Door Roll-up mechanism

TOOLS REQUIRED

The following hand tools will be needed for proper

installation of your new Rhino Shelter Building:

9/16 Open End Wrench

9/16 Socket or Box Wrench

Large Flat Head Screwdriver

2lb maul or Sledgehammer

2 Foot Level

12’ Foot Step Ladder

Stakes & string for squaring area

1 2 3 4 5 6 ... 10 11