Rhino-shelter ROUND-30W X 40L X 15H Manuel d'utilisateur télécharger pdf

Assembly Instructions

30x40x15 Round Style Portable Building With Single Door

Version 2.0

Please DO NOT return unit to store or dealer. For all questions or shortages please contact

Customer Service at: 800-447-7079 or 203-877-7070

ASSEMBLY INSTRUCTIONS

ROUND STYLE 30x40x15

WITH SINGLE DOOR

Please read instructions completely before

you begin. This will help attain the best

results for your installation.

CONGRATULATIONS!

Congratulations on your purchase of a MDM Products

30x40x15 Round Style Portable Building. With proper

installation, use, and maintenance your new unit will

provide many years of good and suitable service. Your

new MDM Products portable enclosure is a combination

of excellent engineering and well thought out design.

The unit is comprised of a rigid tubular frame, covered

with a long life polyethylene cover and door ends.

The multiple part frame assembly is pre-drilled for easy

insertion of frame bolts. The tubing is made from high-

grade galvanized steel, resisting moisture and oxidation

over the life of the shelter. The cover and doors are

made from ASTM-5 approved polyethylene materials.

The cover is UV protected for exposure to sunlight.

SAFETY WARNING

The installation of this unit must conform to the

requirements of all authorities having

jurisdiction in your specific local area. In the

absence of such requirements, the assembly

and installation must conform to the provided

assembly and installation instructions. MDM

Products, LLC will not responsible for failure to

comply with any requirements in a given local

area. Damages, consequential damages, or

injuries caused by improper installation,

alteration, improper use, or damages caused by

snow, wind, or any acts of nature are strictly

that of the user. Unit is not intended for

occupancy for any length of time.

For installation assistance or Customer Service, please

call 800-447-7079 or 203-877-7070, 8AM-5PM EST.

Crates should be inspected upon delivery from carrier,

and any evident damages should be noted on the bill of

lading before signing. If upon opening the crates hidden

damage is discovered, contact carrier or it’s agent

immediately. Claims for shipping damage MUST

made with the shipping company. An inspection of the

goods will most likely be required. Do not discard

packing or any components before the freight company

inspection. All claims for freight damage must be made

within 15 days of receipt of the

goods in accordance with

ICC regulations.

ASSEMBLY PROCEDURE

The proper sequence and steps to install this unit will

produce a proper and good installation. Failure to read

and follow these guidelines may result in an improper

installation and will void all warranty and protection the

owner is entitled to with the product. The overall steps to

be undertaken are:

1. Perform an inventory check before beginning, to

be certain all components are available for

installation.

2. Prepare location and place all unit boxes near

location sight.

3. Assemble Seven (7) Arch Assemblies of unit.

4. Secure Baseplate Flanges to Base Surface.

5. Begin Frame Assembly with Front End Arch, first

Interior Arch, and Wind Braces with the first

ridge crest, and side rail sections.

6. Add additional Interior Arch Assemblies with

each section of side rails.

7. Add Rear Arch and Rear Wind Braces.

8. Install Rear Panel and Front Panel Framing.

9. Install Main Cover over frame assembly.

10. Install Front Fabric Panels over Front Panel.

11. Install Rear Fabric Cover over Back Panel.

12. Install Mechanical Roll Up Door

TOOLS REQUIRED

The following hand tools will be needed for proper

installation of your new MDM Products building:

12mm, 14mm, and 17mm Open End Wrenches

12mm, 14mm, 17mm Sockets or Box Wrench

Large Flat Head Screwdriver2lb maul or Sledgehammer

4-Foot Level

14’ Step Ladder

Stakes & String for aligning Base Plates & Frame

INVENTORY CHECK

Start installation procedure by removing all components from

packaging to ensure all components are present. Inventory

chart appears on the last page of this manual.

1 2 3 4 5 6 ... 17 18

Résumé du contenu

Page 1

Assembly Instructions 30x40x15 Round Style Portable Building With Single Door 1 Version 2.0 Please DO NOT return unit to store or dealer. For all que

Page 2 - Version 2.0

Assembly Instructions 30x40x15 Round Style Portable Building With Single Door 10 Version 2.0 Please DO NOT return unit to store or dealer. For all qu

Page 3 - ARCH ASSEMBLY

Assembly Instructions 30x40x15 Round Style Portable Building With Single Door 11 Version 2.0 Please DO NOT return unit to store or dealer. For all qu

Page 4 - SECURING BASE FLANGES

Assembly Instructions 30x40x15 Round Style Portable Building With Single Door 12 Version 2.0 Please DO NOT return unit to store or dealer. For all qu

Page 5