Rhino-shelter EXT ROUND-12WX24LX8H Manuel d'utilisateur télécharger pdf

Assembly Instructions Extended Round Style 12 x 24 x 8

V2.2

Please Do NOT Return Assembly to Dealer or Store. For All questions or Shortages please call MDM Products directly

Customer Service 800-447-7079 or 203-877-7070

ASSEMBLY INSTRUCTIONS

ROUND STYLE 12Wx24Lx8H

Congratulations!

Congratulations on your purchase of a Round Extended

Style Garage/Shelter by MDM Products LLC. With

proper installation, use, and maintenance, your new unit

will provide many years of good and suitable service.

Your new Rhino Shelter portable enclosure is a

combination of excellent engineering and well thought

out design. The unit is comprised of a rigid tubular

frame, covered with a long life polyethylene cover and

double door ends.

The multiple part frame is pre-drilled for easy insertion of

hardware to assemble. The tubing is made from high-

grade galvanized steel tubing, to resist moisture and

oxidation over the life of the shelter. The covering

membrane is made from ASTM-5 approved polyethylene

materials. The cover is UV protected for continual

exposure to the sunlight.

It is suggested that you read the assembly instructions

completely

before you begin. This will help attain the

best results for your installation the first time.

SAFETY & CODE WARNING

The installation of this unit must conform to the

requirements of all authorities having jurisdiction in

your specific local area. In the absence of such

requirements, the installation must conform to the

provided assembly and installation instructions.

MDM Products LLC will not be responsible for failure

to comply with any requirements in a given local

area. Consequential damages or injuries caused by

improper installation, alteration, or improper use are

strictly that of the user. Unit MUST be cleared of All

Snow Accumulation immediately to avoid overload.

Unit is not to be used for occupancy for any length

of time. No running internal combustion engines,

open flames, or contact with heated surfaces are

allowed.

For installation assistance or Customer Service, please

call 800-447-7079 or 203-877-7070, 8AM-5PM EST.

Cartons should be inspected upon delivery from carrier,

and any evident damages should be noted on the bill of

lading before signing. If upon opening the cartons

hidden damage is noted, contact carrier or its agent

immediately. Claims for shipping damage MUST be

made with the shipping company. An inspection of the

goods will most likely be required. Do not discard

packing or any components before the freight company’s

inspection. All claims for freight damage must be made

with 15 days of receipt of the goods in accordance with

ICC regulations.

ASSEMBLY PROCEDURE

The proper sequence and steps to install this unit will

produce a proper and good installation. Failure to read

and follow these guidelines may result in an improper

installation and will void all warranty and protection the

owner is entitled to with the product. The steps to be

undertaken are:

1. Perform an inventory check before beginning to be

certain all components are available for installation.

2. Prepare location and place both unit boxes near

location sight.

3. Assemble seven (7) frame arches of unit

4. Assemble unit end arch, first interior arch, and Wind

Braces with first base rails and side rail sections.

5. Add additional arch assemblies with each section of

base rails and side rails.

6. Place frame into desired position and level

frame

both end-to-end and side-to-side. Measure interior

of frame feet across opposite corners and square

7. Anchor frame assembly to ground with provided

anchors, u-bolts and drive rod provided.

8. Install two(2) doors on both ends of frame assembly.

9. Install main cover over frame assembly.

TOOLS REQUIRED

The following hand tools will be needed for proper

installation of your new Rhino Shelter unit:

9/16” Open End Wrench

9/16” Socket or Box Wrench

Large Flat Tip Screwdriver

Maul or Sledgehammer

2 foot Level

6-Foot Step Ladder

INVENTORY CHECK

Start installation procedure by removing all components

from packaging and ensure all components are present

Qty No. Part Number Description

1 RUC-10000 Main Unit Cover –

122408RSK

2 DZD-5002 End Panel Door with

Double Zippers

4 1 EUL-4021 End Upright w/Foot

7 2 RC-3020 Right Side Crest Tube

7 3 LC-3021 Left Side Crest Tube –

swedged end

1 2 3 4 5 6 7 8 9