Rhino-shelter HOUSE-12W X 20L X 8H Manuel d'utilisateur télécharger pdf

Assembly Instructions House Style 12 x 20 x 8

V2.2

Do NOT Return Assembly To Dealer or Store. For All Assembly Questions or Shortages Please Call MDM Products Directly

Customer Service 800-447-7079 or 203-877-7070

ASSEMBLY INSTRUCTIONS

HOUSE STYLE 12Wx20Lx8H

Congratulations!

Congratulations on your purchase of a House Style

Garage/Shelter by Rhino Shelter. With proper

installation, use, and maintenance, your new unit will

provide many years of good and suitable service. Your

new Rhino Shelter instant garage is a combination of

excellent engineering and well thought out design. The

unit is comprised of a rigid tubular frame, covered with a

long life polyethylene cover and double door ends.

The multiple part frame assembly is pre-drilled for easy

insertion of hardware to assemble. The tubing is made

from high-grade galvanized steel tubing, to resist

moisture and oxidation over the life of the shelter. The

fabric parts are made from ASTM-5 approved

polyethylene materials. The cover is also UV protected

for continual exposure to the sunlight.

It is suggested that you read the assembly instructions

completely before you begin. This will help attain the

best results for your installation.

SAFETY WARNING

The installation of this unit must conform to the

requirements of all authorities having jurisdiction in

your specific local area. In the absence of such

requirements, the installation must conform to the

provided assembly and installation instructions.

MDM Products LLC will not be responsible for failure

to comply with any requirements in a given local

area. Consequential damages or injuries caused by

improper installation, alteration, or improper use are

strictly that of the user. Unit MUST be cleared of All

Snow Accumulation immediately to avoid overload.

Unit is not to be used for occupancy for any length

of time. No running internal combustion engines,

open flames, or contact with heated surfaces are

allowed.

For installation assistance or Customer Service, please

call 800-447-7079 or 203-877-7070, 8AM-5PM EST.

Cartons should be inspected upon delivery from carrier,

and any evident damages should be noted on the bill of

lading before signing. If upon opening the cartons

hidden damage is noted, contact carrier or its agent

immediately. Claims for shipping damage MUST be

made with the shipping company. An inspection of the

goods will most likely be required. Do not discard

packing or any components before the freight company’s

inspection. All claims for freight damage must be made

with 15 days of receipt of the goods in accordance with

ICC regulations.

ASSEMBLY PROCEDURE

The proper sequence and steps to install this unit will

produce a proper and good installation. Failure to read

and follow these instructions may result in an improper

installation and will void all warranty and protection the

owner is entitled to with the product. The steps to be

undertaken are:

1. Perform an inventory check before beginning to be

certain all components are available for installation.

2. Prepare location and place both unit boxes near

location sight.

3. Assemble six (6) arches of unit

4. Assemble unit end arch, first interior arch, and wind

braces with first base rails and side rail sections.

5. Add additional arch assemblies with each section of

base Rails and side rails.

6. Place frame into desired position and level

frame

both end-to-end and side-to-side. Measure interior

of frame feet across opposite corners and square as

needed.

7. Anchor frame assembly to ground with provided

anchors, u-bolts and drive rod provided.

8. Install two(2) doors on both ends of frame assembly.

9. Install main cover over frame assembly.

TOOLS REQUIRED

The following hand tools are suggested for proper

installation of your new Rhino Shelter unit:

9/16” Open End Wrench

9/16” Socket or Box Wrench

Large Flat Tip Screwdriver

Maul or Sledgehammer

2-foot Level

6-Foot Step Ladder

INVENTORY CHECK

Start installation procedure by removing all components

from packaging and ensure all components are present

Qty Part Number Description

1 MUC-5000 Main Unit Cover

2 DZD-5002 End Panel Door with Zippers

4 EUL-2002 End Upright w/Foot

12 BTSC-2006 Bent Tube Side Crest

1 2 3 4 5 6 7 8 9

Résumé du contenu

Page 1 - HOUSE STYLE 12Wx20Lx8H

Assembly Instructions House Style 12 x 20 x 8 V2.2 Do NOT Return Assembly To Dealer or Store. For All Assembly Questions or Shor

Page 2

Assembly Instructions House Style 12 x 20 x 8 6 TC-2000 Top Crest Tube 8 CSU-2001 Center Straight Uprights 2 CW-2005 Corner Wind

Page 3

Assembly Instructions House Style 12 x 20 x 8 FRAME ASSEMBLY Step1. Assemble the Front and Rear End Arch Assemblies. Each will consis

Page 4

Assembly Instructions House Style 12 x 20 x 8 Rail should fasten under the End Top Crest Arches but above middle Top Crest tubes. ANCHO

Page 5

Assembly Instructions House Style 12 x 20 x 8 V2.2 Do NOT Return Assembly To Dealer or Store. For All Assembly Questions or Sho

Page 6

Assembly Instructions House Style 12 x 20 x 8 Door assembly is drawn over frame by tightening rope and securing to turnbuckles at the

Page 7

Assembly Instructions House Style 12 x 20 x 8 Note: Snug the end panel by turning the turnbuckles or repeating step 3 on a regular basi

Page 8

Assembly Instructions House Style 12 x 20 x 8 downward with a foot to remove excess. Temporarily tie the end of the rope to the turnbuc

Page 9

Assembly Instructions House Style 12 x 20 x 8 V2.2 Do NOT Return Assembly To Dealer or Store. For All Assembly Questions or Shor

Commentaires sur ces manuels

Pas de commentaire

Rhino-shelter HOUSE-12W X 20L X 8H Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rhino-shelter HOUSE-12W X 20L X 8H. Rhino Shelter HOUSE-12W X 20L X 8H User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Rhino-shelter HOUSE-12W X 20L X 8H